Pulsar Helion 2 XP50

SKU: PUL-77402


Pulsar Helion 2 XP50

Product Description

The Helion 2 XP50 has a <40mK thermal sensor, providing even more detail in difficult environmental conditions such as cold mornings, rain or fog.

<40mK NETD Thermal Sensor

By now, most thermal users are familiar with the sensor resolution of a device e.g. 640×480, and also the pixel pitch e.g. 17µm. The improvement of these new Series 2 devices concentrates on a key specification of thermal sensor technology – the NETD value.

The NETD (Noise Equivalent of Temperature Differential), expressed in millikelvins (mK) is one of the most important parameters for thermal sensors as it describes their sensitivity. The lower the NETD value, the higher the sensitivity.

The new <40mK sensor, exclusively manufactured by ULIS for Pulsar puts Pulsar devices at the forefront of the market with the devices all featuring a better image in conditions where there is a low-temperature difference such as during rainfall, fog or cold mornings. These environmental conditions are the most difficult for thermal imagers and this new sensor will provide a clearer image for users.

40mK NETD Sensor

The Helion 2 XP50 series features a 640×480 17µm thermal sensor and a F50/1.2 lens that provides a detection range of up to 1800m for a deer-sized object. The lens is interchangeable and can be replaced with an F38/1.2 lens (PUL-79054 F38 Thermal Len) allowing the device to satisfy the need to have a spotter with a wide field of view (with the 38mm lens fitted) or by switching the lens, a high magnification unit (with a 50mm lens fitted).

Magnesium Alloy Housing

The lightweight magnesium alloy housing stands out due to a high structural strength and resistance to external mechanical and climatic loads. The housing material effectively removes and dissipates the heat generated by the electronics, ensuring the operational stability of the thermal imager and maintains a high quality image during prolonged observation.

Pulsar Helion 2 XP50


Long detection range

High magnification

Step-Up digital zoom

Frost-Resistant AMOLED display

50Hz Refresh rate

Focusable lens

Dioptre control

8 Colour modes

“Display Off” mode

PiP mode

Built-In photo &amp; video recorder

16GB internal memory

Stream Vision compatible

User Friendly controls

Stadiametric rangefinder


Wide operating temperature (-25°C to 50°C)

Four observation modes (Forest, Rocks, Identification and User)

Three calibration modes (Manual, semi-auto, auto)

Pixel correction

Quick-Change, rechargeable IPS5 battery pack

MicroUSB port

Retained lens cap

IPS Battery charger

Interchangeable lens (XP models)

Image Boost Technology